Cần giúp về lỗi của Arduino

Em xin cám ơn vì đã giúp trước ạ
về phần lỗi là

Arduino: 1.8.3 (Windows 10), Board: "Arduino/Genuino Uno"

Arduino: 1.8.3 (Windows 10), Board: "Arduino/Genuino Uno"

C:UserseNViDATAppDataLocalTemparduino_modified_sketch_392389DumpInfo.ino: In function 'void setup()':

DumpInfo:21: error: expected ')' before ';' token

   pinMode(redLed; OUTPUT);

                 ^

DumpInfo:21: error: expected ';' before ')' token

   pinMode(redLed; OUTPUT);

                         ^

DumpInfo:22: error: expected ')' before ';' token

   pinMode(greenLed; OUTPUT);

                   ^

DumpInfo:22: error: expected ';' before ')' token

   pinMode(greenLed; OUTPUT);

                           ^

DumpInfo:23: error: expected ')' before ';' token

   pinMode(blueLed; OUTPUT);

                  ^

DumpInfo:23: error: expected ';' before ')' token

   pinMode(blueLed; OUTPUT);

                          ^

C:UserseNViDATAppDataLocalTemparduino_modified_sketch_392389DumpInfo.ino: In function 'void loop()':

DumpInfo:59: error: expected ')' before ';' token

     digitalWrite(blueLed; High);

                         ^

DumpInfo:59: error: 'High' was not declared in this scope

     digitalWrite(blueLed; High);

                           ^

DumpInfo:69: error: 'redLED' was not declared in this scope

     digitalWrite(redLED; High);

                  ^

DumpInfo:69: error: 'High' was not declared in this scope

     digitalWrite(redLED; High);

                          ^

exit status 1
expected ')' before ';' token

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

còn phần code của em là

*/

#include <SPI.h>
#include <MFRC522.h>
 
#define SS_PIN 10
#define RST_PIN 9
constexpr uint8_t redLed = 5;   // Set Led Pins
constexpr uint8_t greenLed = 6;
constexpr uint8_t blueLed = 7;
MFRC522 mfrc522(SS_PIN, RST_PIN);   // Create MFRC522 instance.
 
void setup() 
{
  pinMode(redLed; OUTPUT);
  pinMode(greenLed; OUTPUT);
  pinMode(blueLed; OUTPUT);
  Serial.begin(9600);   // Initiate a serial communication
  SPI.begin();      // Initiate  SPI bus
  mfrc522.PCD_Init();   // Initiate MFRC522
  Serial.println("Nhap the");
  Serial.println();

}
void loop() 
{
  // Look for new cards
  if ( ! mfrc522.PICC_IsNewCardPresent()) 
  {
    return;
  }
  // Select one of the cards
  if ( ! mfrc522.PICC_ReadCardSerial()) 
  {
    return;
  }
  //Show UID on serial monitor
  Serial.print("UID tag :");
  String content= "";
  byte letter;
  for (byte i = 0; i < mfrc522.uid.size; i++) 
  {
     Serial.print(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " ");
     Serial.print(mfrc522.uid.uidByte[i], HEX);
     content.concat(String(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " "));
     content.concat(String(mfrc522.uid.uidByte[i], HEX));
  }
  Serial.println();
  Serial.print("Message : ");
  content.toUpperCase();
  if (content.substring(1) == "56 78 2C 07") //Mã thẻ uid ( thay thế)
  {
    Serial.println("Truy cap du lieu");
    Serial.println();
    digitalWrite(blueLed; HIGH); //Lỗi ở đây
    delay(3000);
  }
 
 else   {
    Serial.println(" Access denied");
    digitalWrite(greenLed; HIGH); // Đây nữa
    delay(3000);
  }
}