Tạo bài viết
Đăng ký
10/10/2018, 11:32

CPU chạy 10%, Ram thừa ~800MB nhưng apache bị teo

chào các bạn mình đang quản lý server của công ty mình . hiện tại có khoảng 15 site nhưng các site chỉ nhiều lắm là 100 người online nhưng server rất hay bị chết apache mình toàn phải khởi động lại apache = lệnh "service httpd restart" thì các web mới tiếp tục chạy được. mình dùng Xenos và Kloxo cấu hình mặc định.

Cấu hình máy chủ của mình là
Máy chủ System X3100 - M3 (4253-62X)
Xuất xứ China
Part Number 4253-62X
Kiểu dáng Tower / 5U
Bộ VXL Intel® Core 2C i3-540 3.06GHz/4MB L3, 1/1
Bộ nhớ mở rộng RAM 1 x 2GB PC5300, PC3-10600 1333Mhz ECC DDR3, 1/4 (Max 16GB)
Bộ điều khiển đĩa cứng RAID 0, 1
Ổ cứng 2x250GB SATA simple swap - support SATA HDD 3.5 inch (Max 4 bays)
Giao diện mạng Dual Gigabit Ethernet 10/100/1000
Ổ quang DVD-ROM SATA
Bộ nhớ màn hình 8MB
Nguồn 350W Non-Hotswap 1/1
Màn hình Option


TOUR DU LỊCH THÁI LAN TỪ HÀ NỘI: Được biết đến là thiên đường du lịch, Thái Lan luôn là điểm dừng chân lý tưởng cho du khách trong những kỳ nghỉ ngắn hay dài ngày của mình. Với con người thân thiện và vui vẻ, đất nước nhiệt đới độc đáo, nền văn hóa và lịch sử lâu đời, chắc chắn đến với "Xứ sở chùa vàng" quý khách sẽ có được nhiều trải nghiệm thú vị và ấn tượng. Cùng tham khảo các chương trình tour đi Thái Lan đang được mở bán hàng ngày tại VIETSENSE TRAVEL
sonnb viết 13:33 ngày 10/10/2018
15 site mà 2GB RAM thì quá ít bạn à. Hơn nữa phải xem log của apache mới tìm nguyên do được.
moianminh` viết 13:32 ngày 10/10/2018
Nov 6 03:19:00 server1 xinetd[2462]: EXIT: ftp status=0 pid=24977 duration=0(sec)
Nov 6 03:19:28 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0c:76:51:e4:02:08:00 SRC=192.168.15.235 DST=255.255.255.255 LEN=72 TOS=0x00 PREC=0x00 TTL=128 ID=31391 PROTO=UDP SPT=3326 DPT=37213 LEN=52
Nov 6 03:24:00 server1 xinetd[2462]: START: smtp pid=26211 from=127.0.0.1
Nov 6 03:24:00 server1 xinetd[2462]: START: ftp pid=26214 from=127.0.0.1
Nov 6 03:24:00 server1 pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Nov 6 03:24:00 server1 xinetd[2462]: EXIT: smtp status=0 pid=26211 duration=0(sec)
Nov 6 03:24:00 server1 pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Nov 6 03:24:00 server1 xinetd[2462]: EXIT: ftp status=0 pid=26214 duration=0(sec)
Nov 6 03:24:28 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0c:76:51:e4:02:08:00 SRC=192.168.15.235 DST=255.255.255.255 LEN=72 TOS=0x00 PREC=0x00 TTL=128 ID=31767 PROTO=UDP SPT=3327 DPT=37213 LEN=52
Nov 6 03:29:00 server1 xinetd[2462]: START: smtp pid=27347 from=127.0.0.1
Nov 6 03:29:00 server1 xinetd[2462]: START: ftp pid=27350 from=127.0.0.1
Nov 6 03:29:00 server1 pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Nov 6 03:29:00 server1 xinetd[2462]: EXIT: smtp status=0 pid=27347 duration=0(sec)
Nov 6 03:29:00 server1 pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Nov 6 03:29:00 server1 xinetd[2462]: EXIT: ftp status=0 pid=27350 duration=0(sec)
Nov 6 03:29:28 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0c:76:51:e4:02:08:00 SRC=192.168.15.235 DST=255.255.255.255 LEN=72 TOS=0x00 PREC=0x00 TTL=128 ID=32153 PROTO=UDP SPT=3328 DPT=37213 LEN=52
Nov 6 03:30:25 server1 kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=222.189.239.245 DST=123.30.179.138 LEN=40 TOS=0x00 PREC=0x00 TTL=104 ID=256 PROTO=TCP SPT=6000 DPT=1433 WINDOW=16384 RES=0x00 SYN URGP=0
Nov 6 03:33:43 server1 kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=58.218.200.242 DST=123.30.179.138 LEN=40 TOS=0x00 PREC=0x00 TTL=114 ID=256 PROTO=TCP SPT=30032 DPT=1433 WINDOW=16384 RES=0x00 SYN URGP=0
Nov 6 03:34:00 server1 xinetd[2462]: START: smtp pid=28443 from=127.0.0.1
Nov 6 03:34:00 server1 xinetd[2462]: START: ftp pid=28446 from=127.0.0.1
Nov 6 03:34:00 server1 pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Nov 6 03:34:00 server1 xinetd[2462]: EXIT: smtp status=0 pid=28443 duration=0(sec)
Nov 6 03:34:00 server1 pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Nov 6 03:34:00 server1 xinetd[2462]: EXIT: ftp status=0 pid=28446 duration=0(sec)
Nov 6 03:34:28 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0c:76:51:e4:02:08:00 SRC=192.168.15.235 DST=255.255.255.255 LEN=72 TOS=0x00 PREC=0x00 TTL=128 ID=32523 PROTO=UDP SPT=3329 DPT=37213 LEN=52
Nov 6 03:39:00 server1 xinetd[2462]: START: ftp pid=29361 from=127.0.0.1
Nov 6 03:39:00 server1 xinetd[2462]: START: smtp pid=29364 from=127.0.0.1
Nov 6 03:39:00 server1 pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Nov 6 03:39:00 server1 xinetd[2462]: EXIT: smtp status=0 pid=29364 duration=0(sec)
Nov 6 03:39:00 server1 pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Nov 6 03:39:00 server1 xinetd[2462]: EXIT: ftp status=0 pid=29361 duration=0(sec)
Nov 6 03:39:28 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0c:76:51:e4:02:08:00 SRC=192.168.15.235 DST=255.255.255.255 LEN=72 TOS=0x00 PREC=0x00 TTL=128 ID=150 PROTO=UDP SPT=3330 DPT=37213 LEN=52
Nov 6 03:44:00 server1 xinetd[2462]: START: smtp pid=30550 from=127.0.0.1
Nov 6 03:44:00 server1 xinetd[2462]: START: ftp pid=30553 from=127.0.0.1
Nov 6 03:44:00 server1 pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Nov 6 03:44:00 server1 xinetd[2462]: EXIT: smtp status=0 pid=30550 duration=0(sec)
Nov 6 03:44:00 server1 pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Nov 6 03:44:00 server1 xinetd[2462]: EXIT: ftp status=0 pid=30553 duration=0(sec)
Nov 6 03:44:28 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0c:76:51:e4:02:08:00 SRC=192.168.15.235 DST=255.255.255.255 LEN=72 TOS=0x00 PREC=0x00 TTL=128 ID=525 PROTO=UDP SPT=3331 DPT=37213 LEN=52
Nov 6 03:49:00 server1 xinetd[2462]: START: smtp pid=31590 from=127.0.0.1
Nov 6 03:49:00 server1 xinetd[2462]: START: ftp pid=31593 from=127.0.0.1
Nov 6 03:49:00 server1 pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Nov 6 03:49:00 server1 pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Nov 6 03:49:00 server1 xinetd[2462]: EXIT: smtp status=0 pid=31590 duration=0(sec)
Nov 6 03:49:00 server1 xinetd[2462]: EXIT: ftp status=0 pid=31593 duration=0(sec)
Nov 6 03:49:28 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0c:76:51:e4:02:08:00 SRC=192.168.15.235 DST=255.255.255.255 LEN=72 TOS=0x00 PREC=0x00 TTL=128 ID=916 PROTO=UDP SPT=3332 DPT=37213 LEN=52
Nov 6 03:54:00 server1 xinetd[2462]: START: smtp pid=32448 from=127.0.0.1
Nov 6 03:54:00 server1 xinetd[2462]: START: ftp pid=32451 from=127.0.0.1
Nov 6 03:54:00 server1 pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Nov 6 03:54:00 server1 xinetd[2462]: EXIT: smtp status=0 pid=32448 duration=0(sec)
Nov 6 03:54:00 server1 pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Nov 6 03:54:00 server1 xinetd[2462]: EXIT: ftp status=0 pid=32451 duration=0(sec)
Nov 6 03:54:28 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0c:76:51:e4:02:08:00 SRC=192.168.15.235 DST=255.255.255.255 LEN=72 TOS=0x00 PREC=0x00 TTL=128 ID=1303 PROTO=UDP SPT=3333 DPT=37213 LEN=52
Nov 6 03:58:09 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.48 DST=123.30.179.138 LEN=73 TOS=0x00 PREC=0x00 TTL=250 ID=63392 DF PROTO=UDP SPT=53 DPT=37869 LEN=53
Nov 6 03:58:20 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.35 DST=123.30.179.138 LEN=73 TOS=0x00 PREC=0x00 TTL=250 ID=52947 DF PROTO=UDP SPT=53 DPT=60369 LEN=53
Nov 6 03:58:34 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.37 DST=123.30.179.138 LEN=73 TOS=0x00 PREC=0x00 TTL=250 ID=2331 DF PROTO=UDP SPT=53 DPT=35977 LEN=53
Nov 6 03:58:44 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.39 DST=123.30.179.138 LEN=73 TOS=0x00 PREC=0x00 TTL=250 ID=51366 DF PROTO=UDP SPT=53 DPT=40841 LEN=53
Nov 6 03:58:54 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.30 DST=123.30.179.138 LEN=72 TOS=0x00 PREC=0x00 TTL=250 ID=20392 DF PROTO=UDP SPT=53 DPT=45601 LEN=52
Nov 6 03:59:13 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.47 DST=123.30.179.138 LEN=71 TOS=0x00 PREC=0x00 TTL=250 ID=64227 DF PROTO=UDP SPT=53 DPT=35493 LEN=51
Nov 6 03:59:27 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.48 DST=123.30.179.138 LEN=72 TOS=0x00 PREC=0x00 TTL=250 ID=15049 DF PROTO=UDP SPT=53 DPT=52275 LEN=52
Nov 6 03:59:28 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0c:76:51:e4:02:08:00 SRC=192.168.15.235 DST=255.255.255.255 LEN=72 TOS=0x00 PREC=0x00 TTL=128 ID=11774 PROTO=UDP SPT=3334 DPT=37213 LEN=52
Nov 6 03:59:41 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.26 DST=123.30.179.138 LEN=72 TOS=0x00 PREC=0x00 TTL=250 ID=32700 DF PROTO=UDP SPT=53 DPT=52698 LEN=52
Nov 6 03:59:52 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.21 DST=123.30.179.138 LEN=73 TOS=0x00 PREC=0x00 TTL=250 ID=65228 DF PROTO=UDP SPT=53 DPT=43224 LEN=53
Nov 6 04:00:03 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.21 DST=123.30.179.138 LEN=72 TOS=0x00 PREC=0x00 TTL=250 ID=12013 DF PROTO=UDP SPT=53 DPT=53213 LEN=52
Nov 6 04:00:14 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.29 DST=123.30.179.138 LEN=72 TOS=0x00 PREC=0x00 TTL=250 ID=60185 DF PROTO=UDP SPT=53 DPT=46421 LEN=52
Nov 6 04:00:27 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.24 DST=123.30.179.138 LEN=73 TOS=0x00 PREC=0x00 TTL=250 ID=32733 DF PROTO=UDP SPT=53 DPT=41955 LEN=53
Nov 6 04:00:38 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.31 DST=123.30.179.138 LEN=72 TOS=0x00 PREC=0x00 TTL=250 ID=12029 DF PROTO=UDP SPT=53 DPT=59792 LEN=52
Nov 6 04:00:48 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.25 DST=123.30.179.138 LEN=73 TOS=0x00 PREC=0x00 TTL=250 ID=34472 DF PROTO=UDP SPT=53 DPT=40635 LEN=53
Nov 6 04:00:59 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.23 DST=123.30.179.138 LEN=73 TOS=0x00 PREC=0x00 TTL=250 ID=41653 DF PROTO=UDP SPT=53 DPT=39011 LEN=53
Nov 6 04:01:10 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.21 DST=123.30.179.138 LEN=71 TOS=0x00 PREC=0x00 TTL=250 ID=20955 DF PROTO=UDP SPT=53 DPT=44093 LEN=51
Nov 6 04:01:20 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.28 DST=123.30.179.138 LEN=73 TOS=0x00 PREC=0x00 TTL=250 ID=36679 DF PROTO=UDP SPT=53 DPT=45241 LEN=53
Nov 6 04:01:30 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.21 DST=123.30.179.138 LEN=72 TOS=0x00 PREC=0x00 TTL=250 ID=41355 DF PROTO=UDP SPT=53 DPT=60228 LEN=52
Nov 6 04:01:42 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.41 DST=123.30.179.138 LEN=72 TOS=0x00 PREC=0x00 TTL=250 ID=49818 DF PROTO=UDP SPT=53 DPT=49883 LEN=52
Nov 6 04:01:53 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.38 DST=123.30.179.138 LEN=73 TOS=0x00 PREC=0x00 TTL=250 ID=49043 DF PROTO=UDP SPT=53 DPT=45591 LEN=53
Nov 6 04:02:03 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=e4:1f:13:3f:1c:52:00:19:c6:00:46:ed:08:00 SRC=123.30.52.41 DST=123.30.179.138 LEN=73 TOS=0x00 PREC=0x00 TTL=250 ID=14411 DF PROTO=UDP SPT=53 DPT=37962 LEN=53
Nov 6 04:02:04 server1 syslogd 1.4.1: restart.
Nov 6 04:02:04 server1 syslogd 1.4.1: restart.
Nov 6 04:02:04 server1 syslogd 1.4.1: restart.
Nov 6 04:02:04 server1 syslogd 1.4.1: restart.
đây là các dòng cuối của file /var/log/messages.2



ĐI DU LỊCH THÁI LAN TỪ HÀ NỘI: Được biết đến là thiên đường du lịch, Thái Lan luôn là điểm dừng chân lý tưởng cho du khách trong những kỳ nghỉ ngắn hay dài ngày của mình. Với con người thân thiện và vui vẻ, đất nước nhiệt đới độc đáo, nền văn hóa và lịch sử lâu đời, chắc chắn đến với "Xứ sở chùa vàng" quý khách sẽ có được nhiều trải nghiệm thú vị và ấn tượng. Cùng tham khảo các chương trình tour đi Thái Lan đang được mở bán hàng ngày tại VIETSENSE TRAVEL
moianminh` viết 13:40 ngày 10/10/2018
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
Nov 6 00:33:05 server1 kernel: Processor #4 6:5 APIC version 21
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
Nov 6 00:33:05 server1 kernel: Processor #5 6:5 APIC version 21
Nov 6 00:33:05 server1 cpuspeed: Enabling ondemand cpu frequency scaling governor
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC (acpi_id[0x10] lapic_id[0x10] disabled)
Nov 6 00:33:05 server1 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Nov 6 00:33:05 server1 kernel: ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
Nov 6 00:33:05 server1 kernel: IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
Nov 6 00:33:05 server1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 6 00:33:05 server1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 6 00:33:05 server1 kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Nov 6 00:33:05 server1 kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
Nov 6 00:33:05 server1 kernel: Using ACPI (MADT) for SMP configuration information
Nov 6 00:33:05 server1 kernel: Allocating PCI resources starting at 80000000 (gap: 7f800000:60800000)
Nov 6 00:33:05 server1 kernel: Detected 3059.233 MHz processor.
Nov 6 00:33:05 server1 kernel: Built 1 zonelists. Total pages: 522240
Nov 6 00:33:05 server1 kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00
Nov 6 00:33:05 server1 kernel: Enabling fast FPU save and restore... done.
Nov 6 00:33:05 server1 kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 6 00:33:05 server1 kernel: Initializing CPU#0
Nov 6 00:33:05 server1 kernel: CPU 0 irqstacks, hard=c0768000 soft=c0748000
Nov 6 00:33:05 server1 kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Nov 6 00:33:05 server1 kernel: Console: colour VGA+ 80x25
Nov 6 00:33:05 server1 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 6 00:33:05 server1 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 6 00:33:05 server1 kernel: Memory: 2060860k/2088960k available (2178k kernel code, 24640k reserved, 907k data, 228k init, 1169396k highmem)
Nov 6 00:33:05 server1 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Nov 6 00:33:05 server1 kernel: hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0, 0, 0, 0, 0, 0
Nov 6 00:33:05 server1 kernel: hpet0: 8 64-bit timers, 14318180 Hz
Nov 6 00:33:05 server1 kernel: Using HPET for base-timer
Nov 6 00:33:05 server1 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6118.46 BogoMIPS (lpj=3059233)
Nov 6 00:33:05 server1 kernel: Security Framework v1.0.0 initialized
Nov 6 00:33:05 server1 kernel: SELinux: Initializing.
Nov 6 00:33:05 server1 kernel: selinux_register_security: Registering secondary module capability
Nov 6 00:33:05 server1 kernel: Capability LSM initialized as secondary
Nov 6 00:33:05 server1 kernel: Mount-cache hash table entries: 512
Nov 6 00:33:05 server1 kernel: monitor/mwait feature present.
Nov 6 00:33:05 server1 kernel: using mwait in idle threads.
Nov 6 00:33:05 server1 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 6 00:33:05 server1 kernel: CPU: L2 cache: 256K
Nov 6 00:33:05 server1 kernel: CPU: L3 cache: 4096K
Nov 6 00:33:05 server1 kernel: CPU: Physical Processor ID: 0
Nov 6 00:33:05 server1 kernel: CPU: Processor Core ID: 0
Nov 6 00:33:05 server1 kernel: Intel machine check architecture supported.
Nov 6 00:33:05 server1 kernel: Intel machine check reporting enabled on CPU#0.
Nov 6 00:33:05 server1 kernel: Checking 'hlt' instruction... OK.
Nov 6 00:33:05 server1 kernel: SMP alternatives: switching to UP code
Nov 6 00:33:05 server1 kernel: ACPI: Core revision 20060707
Nov 6 00:33:05 server1 kernel: CPU0: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 02
Nov 6 00:33:05 server1 kernel: SMP alternatives: switching to SMP code
Nov 6 00:33:05 server1 kernel: Booting processor 1/1 eip 11000
Nov 6 00:33:05 server1 kernel: CPU 1 irqstacks, hard=c0769000 soft=c0749000
Nov 6 00:33:05 server1 kernel: Initializing CPU#1
Nov 6 00:33:05 server1 kernel: Calibrating delay using timer specific routine.. 6117.88 BogoMIPS (lpj=3058941)
Nov 6 00:33:05 server1 kernel: monitor/mwait feature present.
Nov 6 00:33:05 server1 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 6 00:33:05 server1 kernel: CPU: L2 cache: 256K
Nov 6 00:33:05 server1 kernel: CPU: L3 cache: 4096K
Nov 6 00:33:05 server1 kernel: CPU: Physical Processor ID: 0
Nov 6 00:33:05 server1 kernel: CPU: Processor Core ID: 0
Nov 6 00:33:05 server1 kernel: Intel machine check architecture supported.
Nov 6 00:33:05 server1 kernel: Intel machine check reporting enabled on CPU#1.
Nov 6 00:33:05 server1 kernel: CPU1: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 02
Nov 6 00:33:05 server1 kernel: SMP alternatives: switching to SMP code
Nov 6 00:33:05 server1 kernel: Booting processor 2/4 eip 11000
Nov 6 00:33:05 server1 kernel: CPU 2 irqstacks, hard=c076a000 soft=c074a000
Nov 6 00:33:05 server1 kernel: Initializing CPU#2
Nov 6 00:33:05 server1 kernel: Calibrating delay using timer specific routine.. 6117.87 BogoMIPS (lpj=3058937)
Nov 6 00:33:05 server1 kernel: monitor/mwait feature present.
Nov 6 00:33:05 server1 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 6 00:33:05 server1 kernel: CPU: L2 cache: 256K
Nov 6 00:33:05 server1 kernel: CPU: L3 cache: 4096K
Nov 6 00:33:05 server1 kernel: CPU: Physical Processor ID: 0
Nov 6 00:33:05 server1 kernel: CPU: Processor Core ID: 2
Nov 6 00:33:05 server1 kernel: Intel machine check architecture supported.
Nov 6 00:33:05 server1 kernel: Intel machine check reporting enabled on CPU#2.
Nov 6 00:33:05 server1 kernel: CPU2: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 02
Nov 6 00:33:05 server1 kernel: SMP alternatives: switching to SMP code
Nov 6 00:33:05 server1 kernel: Booting processor 3/5 eip 11000
Nov 6 00:33:05 server1 kernel: CPU 3 irqstacks, hard=c076b000 soft=c074b000
Nov 6 00:33:05 server1 kernel: Initializing CPU#3
Nov 6 00:33:05 server1 kernel: Calibrating delay using timer specific routine.. 6117.96 BogoMIPS (lpj=3058980)
Nov 6 00:33:05 server1 kernel: monitor/mwait feature present.
Nov 6 00:33:05 server1 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 6 00:33:05 server1 kernel: CPU: L2 cache: 256K
Nov 6 00:33:05 server1 kernel: CPU: L3 cache: 4096K
Nov 6 00:33:05 server1 kernel: CPU: Physical Processor ID: 0
Nov 6 00:33:05 server1 kernel: CPU: Processor Core ID: 2
Nov 6 00:33:05 server1 kernel: Intel machine check architecture supported.
Nov 6 00:33:05 server1 kernel: Intel machine check reporting enabled on CPU#3.
Nov 6 00:33:05 server1 kernel: CPU3: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 02
Nov 6 00:33:05 server1 kernel: Total of 4 processors activated (24472.18 BogoMIPS).
Nov 6 00:33:05 server1 kernel: ENABLING IO-APIC IRQs
Nov 6 00:33:05 server1 kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 6 00:33:05 server1 kernel: Using local APIC timer interrupts.
Nov 6 00:33:05 server1 kernel: checking TSC synchronization across 4 CPUs: passed.
Nov 6 00:33:05 server1 kernel: Brought up 4 CPUs
Nov 6 00:33:05 server1 kernel: migration_cost=16,33
Nov 6 00:33:05 server1 kernel: checking if image is initramfs... it is
Nov 6 00:33:05 server1 kernel: Freeing initrd memory: 3204k freed
Nov 6 00:33:05 server1 kernel: NET: Registered protocol family 16
Nov 6 00:33:05 server1 kernel: ACPI: bus type pci registered
Nov 6 00:33:05 server1 kernel: PCI: Using MMCONFIG
Nov 6 00:33:05 server1 kernel: Setting up standard PCI resources
Nov 6 00:33:05 server1 kernel: ACPI: Interpreter enabled
Nov 6 00:33:05 server1 kernel: ACPI: Using IOAPIC for interrupt routing
Nov 6 00:33:05 server1 kernel: ACPI: No dock devices found.
Nov 6 00:33:05 server1 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 6 00:33:05 server1 kernel: PCI: Transparent bridge - 0000:00:1e.0
Nov 6 00:33:05 server1 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov 6 00:33:05 server1 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 6 00:33:05 server1 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
Nov 6 00:33:05 server1 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
Nov 6 00:33:05 server1 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Nov 6 00:33:05 server1 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Nov 6 00:33:05 server1 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Nov 6 00:33:05 server1 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Nov 6 00:33:05 server1 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 6 00:33:05 server1 kernel: pnp: PnP ACPI init
Nov 6 00:33:05 server1 kernel: pnp: PnP ACPI: found 12 devices
Nov 6 00:33:05 server1 kernel: usbcore: registered new driver usbfs
Nov 6 00:33:05 server1 kernel: usbcore: registered new driver hub
Nov 6 00:33:05 server1 kernel: PCI: Using ACPI for IRQ routing
Nov 6 00:33:05 server1 kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Nov 6 00:33:05 server1 kernel: PCI: Cannot allocate resource region 3 of device 0000:02:00.0
Nov 6 00:33:05 server1 kernel: NetLabel: Initializing
Nov 6 00:33:05 server1 kernel: NetLabel: domain hash size = 128
Nov 6 00:33:05 server1 kernel: NetLabel: protocols = UNLABELED CIPSOv4
Nov 6 00:33:05 server1 kernel: NetLabel: unlabeled traffic allowed by default
Nov 6 00:33:05 server1 kernel: pnp: 00:02: ioport range 0x295-0x2a4 has been reserved
Nov 6 00:33:05 server1 kernel: pnp: 00:0a: ioport range 0x400-0x47f could not be reserved
Nov 6 00:33:05 server1 kernel: pnp: 00:0a: ioport range 0x1180-0x119f has been reserved
Nov 6 00:33:05 server1 kernel: pnp: 00:0a: ioport range 0x500-0x57f has been reserved
Nov 6 00:33:05 server1 kernel: PCI: Bridge: 0000:00:1c.0
Nov 6 00:33:05 server1 kernel: IO window: disabled.
Nov 6 00:33:05 server1 kernel: MEM window: disabled.
Nov 6 00:33:05 server1 kernel: PREFETCH window: disabled.
Nov 6 00:33:05 server1 kernel: PCI: Bridge: 0000:00:1c.4
Nov 6 00:33:05 server1 kernel: IO window: e000-0000
Nov 6 00:33:05 server1 kernel: MEM window: fb900000-00000000
Nov 6 00:33:05 server1 kernel: PREFETCH window: disabled.
Nov 6 00:33:05 server1 kernel: PCI: Bridge: 0000:00:1e.0
Nov 6 00:33:05 server1 kernel: IO window: d000-0000
Nov 6 00:33:05 server1 kernel: MEM window: fb000000-00000000
Nov 6 00:33:05 server1 kernel: PREFETCH window: disabled.
Nov 6 00:33:05 server1 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
Nov 6 00:33:05 server1 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169
Nov 6 00:33:05 server1 kernel: NET: Registered protocol family 2
Nov 6 00:33:05 server1 kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 6 00:33:05 server1 kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 6 00:33:05 server1 kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Nov 6 00:33:05 server1 kernel: TCP: Hash tables configured (established 131072 bind 65536)
Nov 6 00:33:05 server1 kernel: TCP reno registered
Nov 6 00:33:05 server1 kernel: IBM machine detected. Enabling interrupts during APM calls.
Nov 6 00:33:05 server1 kernel: apm: BIOS not found.
Nov 6 00:33:05 server1 kernel: audit: initializing netlink socket (disabled)
Nov 6 00:33:05 server1 kernel: type=2000 audit(1320514344.959:1): initialized
Nov 6 00:33:05 server1 kernel: highmem bounce pool size: 64 pages
Nov 6 00:33:05 server1 kernel: Total HugeTLB memory allocated, 0
Nov 6 00:33:05 server1 kernel: VFS: Disk quotas dquot_6.5.1
Nov 6 00:33:05 server1 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 6 00:33:05 server1 kernel: Initializing Cryptographic API
Nov 6 00:33:05 server1 kernel: alg: No test for crc32c (crc32c-generic)
Nov 6 00:33:05 server1 kernel: ksign: Installing public key data
Nov 6 00:33:05 server1 kernel: Loading keyring
Nov 6 00:33:05 server1 kernel: - Added public key 285B5C47ED7A1E8E
Nov 6 00:33:05 server1 kernel: - User ID: CentOS (Kernel Module GPG key)
Nov 6 00:33:05 server1 kernel: io scheduler noop registered
Nov 6 00:33:05 server1 kernel: io scheduler anticipatory registered
Nov 6 00:33:05 server1 kernel: io scheduler deadline registered
Nov 6 00:33:05 server1 kernel: io scheduler cfq registered (default)
Nov 6 00:33:05 server1 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 6 00:33:05 server1 kernel: ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ AMI] OemTableId [ IST] [20060707]
Nov 6 00:33:05 server1 kernel: ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CST] [20060707]
Nov 6 00:33:05 server1 kernel: ACPI: CPU0 (power states: C1[C1] C2[C3])
Nov 6 00:33:05 server1 kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
Nov 6 00:33:05 server1 kernel: ACPI: CPU1 (power states: C1[C1] C2[C3])
Nov 6 00:33:05 server1 kernel: ACPI: Processor [CPU1] (supports 1 throttling states)
Nov 6 00:33:05 server1 kernel: ACPI: CPU2 (power states: C1[C1] C2[C3])
Nov 6 00:33:05 server1 kernel: ACPI: Processor [CPU2] (supports 1 throttling states)
Nov 6 00:33:05 server1 kernel: ACPI: CPU3 (power states: C1[C1] C2[C3])
Nov 6 00:33:05 server1 kernel: ACPI: Processor [CPU3] (supports 1 throttling states)
Nov 6 00:33:05 server1 kernel: Real Time Clock Driver v1.12ac
Nov 6 00:33:05 server1 kernel: Non-volatile memory driver v1.2
Nov 6 00:33:05 server1 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Nov 6 00:33:05 server1 kernel: ******: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Nov 6 00:33:05 server1 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 6 00:33:05 server1 kernel: 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 6 00:33:05 server1 kernel: brd: module loaded
Nov 6 00:33:05 server1 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 00:33:05 server1 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 00:33:05 server1 kernel: ide-floppy driver 0.99.newide
Nov 6 00:33:05 server1 kernel: usbcore: registered new driver hiddev
Nov 6 00:33:05 server1 kernel: usbcore: registered new driver usbhid
Nov 6 00:33:05 server1 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Nov 6 00:33:05 server1 kernel: PNP: No PS/2 controller found. Probing ports directly.
Nov 6 00:33:05 server1 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 6 00:33:05 server1 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 6 00:33:05 server1 kernel: mice: PS/2 mouse device common for all mice
Nov 6 00:33:05 server1 kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 6 00:33:05 server1 kernel: md: bitmap version 4.39
Nov 6 00:33:05 server1 kernel: TCP bic registered
Nov 6 00:33:05 server1 kernel: Initializing IPsec netlink socket
Nov 6 00:33:05 server1 kernel: NET: Registered protocol family 1
Nov 6 00:33:05 server1 kernel: NET: Registered protocol family 17
Nov 6 00:33:05 server1 kernel: Using IPI No-Shortcut mode
Nov 6 00:33:05 server1 kernel: ACPI: (supports S0 S1 S4 S5)
Nov 6 00:33:05 server1 kernel: Initalizing network drop monitor service
Nov 6 00:33:05 server1 kernel: Freeing unused kernel memory: 228k freed
Nov 6 00:33:05 server1 kernel: Write protecting the kernel read-only data: 409k
Nov 6 00:33:05 server1 kernel: Time: tsc clocksource has been installed.
Nov 6 00:33:05 server1 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 201
Nov 6 00:33:05 server1 kernel: ehci_hcd 0000:00:1a.0: EHCI Host Controller
Nov 6 00:33:05 server1 kernel: ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Nov 6 00:33:05 server1 kernel: ehci_hcd 0000:00:1a.0: debug port 2
Nov 6 00:33:05 server1 kernel: ehci_hcd 0000:00:1a.0: irq 201, io mem 0xfba03000
Nov 6 00:33:05 server1 kernel: ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 6 00:33:05 server1 kernel: usb usb1: configuration #1 chosen from 1 choice
Nov 6 00:33:05 server1 kernel: hub 1-0:1.0: USB hub found
Nov 6 00:33:05 server1 kernel: hub 1-0:1.0: 2 ports detected
Nov 6 00:33:05 server1 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209
Nov 6 00:33:05 server1 kernel: ehci_hcd 0000:00:1d.0: EHCI Host Controller
Nov 6 00:33:05 server1 kernel: ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Nov 6 00:33:05 server1 kernel: ehci_hcd 0000:00:1d.0: debug port 2
Nov 6 00:33:05 server1 kernel: ehci_hcd 0000:00:1d.0: irq 209, io mem 0xfba02000
Nov 6 00:33:05 server1 kernel: ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 6 00:33:05 server1 kernel: usb usb2: configuration #1 chosen from 1 choice
Nov 6 00:33:05 server1 kernel: hub 2-0:1.0: USB hub found
Nov 6 00:33:05 server1 kernel: hub 2-0:1.0: 2 ports detected
Nov 6 00:33:05 server1 kernel: USB Universal Host Controller Interface driver v3.0
Nov 6 00:33:05 server1 kernel: SCSI subsystem initialized
Nov 6 00:33:05 server1 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 217
Nov 6 00:33:05 server1 kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
Nov 6 00:33:05 server1 kernel: usb 1-1: configuration #1 chosen from 1 choice
Nov 6 00:33:05 server1 kernel: hub 1-1:1.0: USB hub found
Nov 6 00:33:05 server1 kernel: hub 1-1:1.0: 6 ports detected
Nov 6 00:33:05 server1 kernel: usb 2-1: new high speed USB device using ehci_hcd and address 2
Nov 6 00:33:05 server1 kernel: usb 2-1: configuration #1 chosen from 1 choice
Nov 6 00:33:05 server1 kernel: hub 2-1:1.0: USB hub found
Nov 6 00:33:05 server1 kernel: hub 2-1:1.0: 8 ports detected
Nov 6 00:33:05 server1 kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x25 impl RAID mode
Nov 6 00:33:05 server1 kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems
Nov 6 00:33:05 server1 kernel: scsi0 : ahci
Nov 6 00:33:05 server1 kernel: scsi1 : ahci
Nov 6 00:33:05 server1 kernel: scsi2 : ahci
Nov 6 00:33:05 server1 kernel: scsi3 : ahci
Nov 6 00:33:05 server1 kernel: scsi4 : ahci
Nov 6 00:33:05 server1 kernel: scsi5 : ahci
Nov 6 00:33:05 server1 kernel: ata1: SATA max UDMA/133 abar m2048@0xfba01000 port 0xfba01100 irq 225
Nov 6 00:33:05 server1 kernel: ata2: DUMMY
Nov 6 00:33:05 server1 kernel: ata3: SATA max UDMA/133 abar m2048@0xfba01000 port 0xfba01200 irq 225
Nov 6 00:33:05 server1 kernel: ata4: DUMMY
Nov 6 00:33:05 server1 kernel: ata5: DUMMY
Nov 6 00:33:05 server1 kernel: ata6: SATA max UDMA/133 abar m2048@0xfba01000 port 0xfba01380 irq 225
Nov 6 00:33:05 server1 kernel: usb 2-1.5: new high speed USB device using ehci_hcd and address 3
Nov 6 00:33:05 server1 kernel: usb 2-1.5: configuration #1 chosen from 1 choice
Nov 6 00:33:05 server1 kernel: input: Avocent USB Composite Device-0 as /class/input/input0
Nov 6 00:33:05 server1 kernel: input: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-1.5
Nov 6 00:33:05 server1 kernel: input: Avocent USB Composite Device-0 as /class/input/input1
Nov 6 00:33:05 server1 kernel: input: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-1.5
Nov 6 00:33:05 server1 kernel: input: Avocent USB Composite Device-0 as /class/input/input2
Nov 6 00:33:05 server1 kernel: input: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-1.5
Nov 6 00:33:05 server1 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 6 00:33:05 server1 kernel: ata1.00: ATA-8: WD2502ABYS-23B7A0 39M4511 42C0463IBM, 02.03B05, max UDMA/133
Nov 6 00:33:05 server1 kernel: ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Nov 6 00:33:05 server1 kernel: ata1.00: configured for UDMA/133
Nov 6 00:33:05 server1 kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 6 00:33:05 server1 kernel: ata3.00: ATA-8: WD2502ABYS-23B7A0 39M4511 42C0463IBM, 02.03B05, max UDMA/133
Nov 6 00:33:05 server1 kernel: ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Nov 6 00:33:05 server1 kernel: ata3.00: configured for UDMA/133
Nov 6 00:33:05 server1 kernel: ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 6 00:33:05 server1 kernel: ata6.00: ATAPI: HL-DT-STDVD-ROM DH10N, 0M10, max UDMA/100, ATAPI AN
Nov 6 00:33:05 server1 kernel: ata6.00: configured for UDMA/100
Nov 6 00:33:05 server1 kernel: Vendor: ATA Model: WD2502ABYS-23B7A Rev: 02.0
Nov 6 00:33:05 server1 kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 6 00:33:05 server1 kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
Nov 6 00:33:05 server1 kernel: sda: Write Protect is off
Nov 6 00:33:05 server1 kernel: SCSI device sda: drive cache: write back
Nov 6 00:33:05 server1 kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
Nov 6 00:33:05 server1 kernel: sda: Write Protect is off
Nov 6 00:33:05 server1 kernel: SCSI device sda: drive cache: write back
Nov 6 00:33:05 server1 kernel: sda: sda1 sda2
Nov 6 00:33:05 server1 kernel: sd 0:0:0:0: Attached scsi disk sda
Nov 6 00:33:05 server1 kernel: Vendor: ATA Model: WD2502ABYS-23B7A Rev: 02.0
Nov 6 00:33:05 server1 kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 6 00:33:05 server1 kernel: SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
Nov 6 00:33:05 server1 kernel: sdb: Write Protect is off
Nov 6 00:33:05 server1 kernel: SCSI device sdb: drive cache: write back
Nov 6 00:33:05 server1 kernel: SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
Nov 6 00:33:05 server1 kernel: sdb: Write Protect is off
Nov 6 00:33:05 server1 kernel: SCSI device sdb: drive cache: write back
Nov 6 00:33:05 server1 kernel: sdb: sdb1
Nov 6 00:33:05 server1 kernel: sd 2:0:0:0: Attached scsi disk sdb
Nov 6 00:33:05 server1 kernel: Vendor: HL-DT-ST Model: DVD-ROM DH10N Rev: 0M10
Nov 6 00:33:05 server1 kernel: Type: CD-ROM ANSI SCSI revision: 05
Nov 6 00:33:05 server1 kernel: device-mapper: uevent: version 1.0.3
Nov 6 00:33:05 server1 kernel: device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
Nov 6 00:33:05 server1 kernel: device-mapper: dm-raid45: initialized v0.2594l
Nov 6 00:33:05 server1 kernel: kjournald starting. Commit interval 5 seconds
Nov 6 00:33:05 server1 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 6 00:33:05 server1 kernel: SELinux: Disabled at runtime.



TOUR DU LỊCH THÁI LAN THÁNG 2: Được biết đến là thiên đường du lịch, Thái Lan luôn là điểm dừng chân lý tưởng cho du khách trong những kỳ nghỉ ngắn hay dài ngày của mình. Với con người thân thiện và vui vẻ, đất nước nhiệt đới độc đáo, nền văn hóa và lịch sử lâu đời, chắc chắn đến với "Xứ sở chùa vàng" quý khách sẽ có được nhiều trải nghiệm thú vị và ấn tượng. Cùng tham khảo các chương trình tour đi Thái Lan đang được mở bán hàng ngày tại VIETSENSE TRAVEL
sonnb viết 13:39 ngày 10/10/2018
Bạn post file /var/logs/httpd/error.log nhé. 2 file trên này là của hệ thống
sonnb viết 13:44 ngày 10/10/2018
Nhìn vào log phía trên thì có vẻ IP: 123.30.179.138 đang scan port server của bạn và bị firewall chặn.
moianminh` viết 13:44 ngày 10/10/2018
[Sat Nov 05 23:38:01 2011] [warn] Init: SSL server IP/port conflict: aaaaaaaaa.com:443 (/home/httpd/conf/domains/aaaaaaaaa.com.conf:91) vs. bbbbbbbbb.vn:443 (/home/httpd/conf/domains/bbbbbbbbb.vn.conf:91)



[Sat Nov 05 23:38:01 2011] [warn] Init: You should not use name-based virtual hosts in conjunction with SSL!!
[Sat Nov 05 23:38:01 2011] [notice] Digest: generating secret for digest authentication ...
[Sat Nov 05 23:38:01 2011] [notice] Digest: done


[Sat Nov 05 23:38:01 2011] [warn] RSA server certificate wildcard CommonName (CN) `*.lxlabs.com' does NOT match server name!?



[Sun Nov 06 02:32:57 2011] [error] [client 66.249.69.219] File does not exist: /home/kloxo/httpd/default/shop

[Sun Nov 06 02:49:33 2011] [error] [client 66.249.69.21] invalid request-URI

[Sun Nov 06 04:02:04 2011] [notice] SIGHUP received. Attempting to restart
WARNING: MaxClients of 50 exceeds ServerLimit value of 4 servers,
lowering MaxClients to 4. To increase, please see the ServerLimit
directive.

[Sun Nov 06 00:52:52 2011] [notice] caught SIGTERM, shutting down
[Sun Nov 06 00:52:53 2011] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)

[Sun Nov 06 00:16:01 2011] [error] [client 95.221.69.76] No user or group set - set suPHP_UserGroup, referer: http://yandex.ru/yandsearch?text=aaaaaaaaa.com
nó cứ lặp đi lặp lại mấy cái dòng này thôi bạn à



CHUYÊN TOUR DU LỊCH THÁI LAN: Được biết đến là thiên đường du lịch, Thái Lan luôn là điểm dừng chân lý tưởng cho du khách trong những kỳ nghỉ ngắn hay dài ngày của mình. Với con người thân thiện và vui vẻ, đất nước nhiệt đới độc đáo, nền văn hóa và lịch sử lâu đời, chắc chắn đến với "Xứ sở chùa vàng" quý khách sẽ có được nhiều trải nghiệm thú vị và ấn tượng. Cùng tham khảo các chương trình tour đi Thái Lan đang được mở bán hàng ngày tại VIETSENSE TRAVEL
sonnb viết 13:33 ngày 10/10/2018
Bị như sau:

- Bạn xem lại cấu hình virtual host. Cấu hình chưa đúng.
- Xem lại virtual host port 443.
- Chỉnh lại ServerLimit và MaxClient trong httpd.conf
- ... Chỉnh xong tính tiếp.
moianminh` viết 13:47 ngày 10/10/2018
<IfModule prefork.c>
StartServers 8
MinSpareServers 5
MaxSpareServers 20
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 4000
</IfModule>
đây httpd.conf của mình zo` chỉnh sao bạn T_T

còn cái virtual host mình đang tìm hiểu ^^ " chưa biết nó là cái zi` " mai mình comment lại


TOUR DL THÁI LAN: Được biết đến là thiên đường du lịch, Thái Lan luôn là điểm dừng chân lý tưởng cho du khách trong những kỳ nghỉ ngắn hay dài ngày của mình. Với con người thân thiện và vui vẻ, đất nước nhiệt đới độc đáo, nền văn hóa và lịch sử lâu đời, chắc chắn đến với "Xứ sở chùa vàng" quý khách sẽ có được nhiều trải nghiệm thú vị và ấn tượng. Cùng tham khảo các chương trình tour đi Thái Lan đang được mở bán hàng ngày tại VIETSENSE TRAVEL
longvnit viết 13:33 ngày 10/10/2018
Hiện tại bạn phải xác định rõ đc thực sự số lượng request tới server của bạn là bao nhiêu sau đó mới tiến hành tinh chỉnh Apache được.
Bạn chạy một số lệnh sau rồi post output lên đây
# vmstat 2 5
# iostat 2 5
# ps -auxf | sort -nr -k 4 | head -10
# ps -auxf | sort -nr -k 3 | head -10
Bật Apache status lên, lấy statistics của apache. Những lệnh trên lấy trong thời điểm server load cao càng tốt.
Bài liên quan

moianminh`

0 chủ đề

0 bài viết

Tác giả nổi bật
Từ khóa nổi bật
AngularJS Blog Bootstrap C / C++ Cấu trúc dữ liệu & Giải thuật Cơ sở dữ liệu Codeigniter Công cụ lập trình CSS CSS cơ bản CSS3 Học Excel HTML HTML cơ bản HTML5 Java Javascript jQuery Json Lập trình mobile Laravel Linux MongoDB MySQL NodeJS Oracle Pascal PHP PHP cơ bản PHP nâng cao Python React Native ReactJS Ruby SEO SQL Server Swift Visual Basic VueJS WordPress XML
Chủ đề nổi bật
0
Các chủ đề đang được quan tâm
phần mềm lập trình php | lập trình web php + mysql | khóa học lập trình php | tự học lập trình php | học php cơ bản thachpham | Đại hạ giá thùng rác nhựa- thùng rác 120l 240l 660 giá rẻ- lh 0911082000 | Jun88: Nhà Cái Uy Tín Với Tỷ Lệ Kèo Cực Đỉnh! | Rsorder RuneScape gold: New Boss Mechanics Expected to Change the Economy | Code24h | Cho thuê phòng trọ hà nội | Cho thuê phòng trọ bình thạnh | Cho thuê phòng trọ | Cho thuê nhà trọ
Đăng ký

Đăng ký nhận thông báo

Các bài học thú vị sẽ được gửi đến inbox của bạn

HỖ TRỢ HỌC VIÊN
VỀ CODE24H
HỢP TÁC VÀ LIÊN KẾT
KẾT NỐI VỚI CHÚNG TÔI
TẢI ỨNG DỤNG TRÊN ĐIỆN THOẠI

CCode 24h, code mọi lúc, mọi nơi

© Copy right 2018 - 2025